Can You Get Back Files on a Buffalo External Hard Drive?
In general, you can get back data from any Buffalo external data storage. The steps you need to take will depend on the type of your storage device.
That’s because Buffalo sells both regular portable hard drives (called MiniStation) and Network-attached Storage (NAS) devices (called DriveStation) that protect data by combining several separate drives into a single RAID array. For instance, the DriveStation Quad can hold up to four hard drives, and it’s easy to set them up in a RAID 0, RAID 1, RAID 5, or RAID 10 stack.
Data from DriveStation RAID arrays can only be recovered by more advanced tools, but data from MiniStation external hard drives can be retrieved just like data from regular internal hard drives. You can also recover each RAID drive separately, but you’ll need a tool that can either handle the right file system or RAW recovery, which ignores the file system and only recovers the data.
How to Get Back Data on a Buffalo External Hard Drive
First, I’ll show you how to recover buffalo NAS hard drive on Windows 10 or 11 using a program called BLR Data Recovery. You can also use macOS and follow the steps below.
It supports all common file systems (FAT16/FAT32, exFAT, NTFS/NTFS5, HFS/HFS+, APFS, ReFS, ext2/ext3/ext4) and has a simple data recovery process with just a few steps. BLR is one of the best data recovery apps you can use to get back lost data from your Buffalo external hard drive.
- On your system drive, get a BLR Tools and put it in place.
- Your computer and the Buffalo MiniStation portable hard drive should be linked.
- Simply open BLR Tools, pick out the external hard drive, and hit the “Search for lost data” button.
- Please wait until BLR is done scanning before clicking Review found things.
- Pick all of the lost files. To cut down the scan results, use BLR’s preview and filters.
- You can get back files from the Buffalo external hard drive by clicking the “Recover” button. Pick the Buffalo file.
- As the restore location, pick your system drive or another good storage device, then click “Next.” in Buffalo.
How to Get Back Data on a Buffalo External Hard Drive
We will show you two ways to get back files from Buffalo DriveStation, TeraStation, and LinkStation NAS drives in this section: one is direct and the other is indirect.
BLR Tools is used for each step again because it works with RAID0, RAID1, RAID5, RAID6, and RAID10 arrays and can also recover data from RAW files. This makes it great for recovering data from NAS and external hard drives.
Get Back Data Straight from Buffalo NAS
To get back info from a Buffalo NAS directly:
- Use a USB cable to connect the Buffalo NAS storage to your PC.
- Get BLR, install it, and then run it.
- Choose the NAS and click on Look for lost files.
- Put each lost file in the restore queue.
- Click the “Recover” button and pick a good place to save the file.
Use NAS hard drives to get files
To get files back from NAS drives:
- Take all of the hard drives off of your Buffalo NAS and connect them to your PC.
- Get BLR, install it, and then run it.
- Click Search for lost data next to the first drive you chose.
- Pick out as many lost files as you can.
- Click the “Recover” button and pick a good place to save the file.
- Do steps 1 through 5 again for the other drives.
FAQ
What can I do to recover buffalo NAS hard drive?
What is the password for my Buffalo portable hard drive?
How can I get to my Buffalo NAS files?
Advice on how to connect a Buffalo portable hard drive.
What does it cost to get back a Buffalo portable hard drive?
Conclusion
Many people who use Windows 10 or 11 like Buffalo external hard drives and NAS data recovery software. Users make mistakes, so it’s likely that some people will lose data on their Buffalo external hard drive or NAS. This happens to a small but still significant number of unfortunate people. Using the methods explained in this piece, it’s usually possible to get back files that were lost on Buffalo data storage devices.
2 Responses