Synology Data Recovery: How to Retouch NAS Files You Deleted
How can I restore items I lost on a Synology NAS hard drive? This page walks you through very basic methods of retrieving lost or formatted files from a Synology NAS device using the BLR data recovery software.
How can I restore Synology NAS data using a PC?
By mistake, I deleted a crucial folder on my Synology NAS (DS 414) configured with RAID5. I’m sorry; I can’t retrieve the folder back from the Recycle Bin thus the bin wasn’t switched on. How can I get my synology NAS files? A BLR Tools user’s query
Built with memory and system software to enable file sharing across platforms, Network Attached Storage, or NAS, is a unique type of specialized data storage server.
Those who utilize NAS most usually enjoy the Synology NAS drive. It can quickly connect your home office and corporate office without any issues, build a cloud office where several people might collaborate, and sync files between several devices. Keeping your memories safe and providing all the tools you need to quickly gather, sort, arrange, and distribute images, the Synology NAS also boasts a fantastic photo management capability.
Synology NAS Data Loss or Failure
On Synology RAID-based NAS systems, the following could lead to data loss:
- Deleting files either on intent or by mistake without knowing how to retrieve them
- Before they may be utilized, NAS RAID disks must be configured or formatted.
- Damage to the file system BTRFS or EXT4
- Bad setup resulting from a sudden power outage or incomplete repairs using RAID arrays
- Data losses occur when a virus or malware targets.
- Other user or system errors
Should you lose data on a Synology disk for any of the above reasons, you can retrieve deleted or lost files from Synology NAS devices in two separate ways.
Restore Synology NAS Data, Not Need to Remove the Disk
NAS data recovery software allows you to try to restore Synology NAS data . Just a few clicks will allow you to retrieve data from either the ext4 or btrfs file system on a Synology NAS device. You no longer have to pull out several disks.
Step 1. Choose a NAS system then start the fix
On your Windows 11/10 64-bit system, get BLR Data Recovery Wizard. When you open this, pick “NAS Recovery”. It will display every NAS system automatically. Click “Scan,” after selecting the one you wish to scan.
Step 2. Verify that the NAS system has SSH service turned on
Click Terminal & SNMP on the Control Panel, then tick the “Enable SSH service” box next-door. Check the port for remote access next; note it. Launch the BLR Data Recovery Wizard then click “Next.”
step 3. Log on from distance to the NAS system
Your IP address and port number will be found right away by this application. You just need the login name and password to proceed. If the IP address or port is incorrect, you can hand fix them. Click “Connect Now” following that.
step 4. Get back deleted or lost NAS files in step four.
The BLR data recovery software then will start looking through your NAS after connecting to it. All the deleted, lost, or added files on your NAS system will be visible to you following the inspection.
Search the hard drive for missing objects using “Filter,” or “Search files or folders.” Select the NAS files you lost on the server and then click “Recover” to save them somewhere.
Click the “Recover” button to recover deleted NAS files.
Removal of the disks and rebuilding of the RAID allows you to retrieve data from a Synology NAS.
Unlike BLR programs NAS data recovery software, most NAS recovery programs on the market today merely provide you a very complicated approach to retrieve your data back, which might be difficult for average users.
Usually, retrieving files from a Synology NAS follows this process:
1 Step: Disable the NAS service. One disk at a time removed from the RAID drives.
Extremely Crucial,
You should obviously mark disks you remove from the NAS with the name of the bay they belong to. These indications will help you to ensure that you rejoin them correctly. Don’t violate the warranty either by removing the NAS drives.
2 Step: Connect the drives to your computer. Either SATA cables or USB-to– SATA connections that come with power will help you to link the disk to the base of your PC. Neither set up nor clear the files as soon as you are requested.
3 Step: Ready an external or internal hard drive or another network storage space with adequate capacity to retain the rescued data from the failed NAS drives.
4 Step: Get one of the top NAS recovery tools and apply it to retrieve your data.
3 Responses